This motion sensor can be used to trigger DVD players, prop controllers, fog machines or just about anything that can be activated with a low-voltage, low-current switch. The following features make it ideal for stealthy haunt installations:

• Black color blends with the darkness
• Once mounted, can be pivoted to adjust coverage area
• Includes masks that can be clipped on to further refine coverage area
• Adjustable on-time keeps your effects activated for however long you want or from retriggering too soon
• No series protection resistor for compatibility with a wider range of devices

Additional Features

• 2 pairs of normally-open (N.O.) / normally closed (N.C.) contacts
• Resettable & non-resettable modes (on-timer can either start when the sensor first detects motion, or can keep starting over until the motion stops)
• Can be configured to fail on or off if power is lost

Specifications

• Required power supply: 12VDC (35mA), 12VAC (38mA), 24VDC (38mA), or 24VAC (45mA) (click for compatible power supply)
• On-time range: .25 to 30 seconds
• Contact rating: 2.0A at 30VDC max
• Operating temperature: -20°F to +120°F
• Dimensions (HxWxD): 1.50in x 6.25in x 1.50in

Buy Now >

This motion sensor is a lower-cost alternative to the sensor above. It can be used to trigger the same devices, but is a bit harder to hide and adjust.

Features

• One pair of normally-open (N.O.) / normally closed (N.C.) contacts
• Sensitivity adjustment

Specifications

• Required power supply: 9.6-16VDC (12mA) (click for compatible power supply)
• On-time: 2 seconds
• Contact rating: .1A at 28VDC (has 10K-ohm resistor in series)
• Operating temperature: 14°F to +122°F
• Dimensions (HxWxD): 3.62in x 2.46in x 1.57in

Buy Now >